There was no air space behind the wall board that was attached to the.
Can i put pellet stove on cemant flooring.
Make sure that your basement floor can support the weight of the pellet stove and the pellet hopper which is the container that holds the pellets.
I used cement board in that same fashion under stove and as a back wall for one year.
The ceilings of the.
We have a newer 155 000 btu one zone steam gas system currently.
Yes all pellet stoves require a non combustible floor protector such as a hearth pad on floors that have combustible material on them such as wood carpet or vinyl.
You cannot install ceramic tile directly on top of a wooden subfloor even without a stove to consider because the material will pop up from the floor within weeks or months of installation.
Place the pellet stove in the basement near an electrical outlet that has the proper voltage and is a gfci rated circuit breaker.
If one of these tiles cracks it needs to be removed and replaced.
The floor protector should extend beneath the appliance and to the front sides and rear as indicated in the owner s manual.
That gives me a reflector under the stove with an air gap before the cement board insulation.
The house is 3200 square ft.
In homes where the floor is wood or carpet tile is usually installed as a mat or pad directly beneath the wood stove to help protect the other floors.
1 measure the depth of your pellet stove.
The wood heat organization recommends setting the floor pad so that it s flush with the surrounding flooring you don t want to remove a fire hazard but create a tripping hazard.
Can you use ceramic.
Many hoppers can hold over 80 pounds worth of pellets.
In most cases it may not be installed on top of carpeting.
It got extremely warm almost hot on the wood floor and the wall board in back of the stove got hot but not much of a concern.
The floor pad can be brick concrete slate ceramic tile or another noncombustible material.
Wood stoves need to sit on a noncombustible surface.
Rather than purchase a plain stone stove pad you can customize a pellet stove pad by making it yourself with cement board and flooring tiles.
The back of the stove was about 18 to 24 from the wall.