Banksphotos getty images.
Can you get away with one coat of floor paint.
If your garage floor is stained with oil grease and rust you can easily give it new life with a coat of concrete floor paint.
Apply a thin coat to your floor and leave it to dry before painting with undiluted paint.
When you are re painting a color with the same color you can usually use just one or two coats of paint primer not required.
Then wipe it down with white spirit and leave to dry before painting.
So you must pour paint back and forth between two buckets until you ve mixed in the solids that have collected at the.
These actually have less body and will need two if not three coats so that the rich color is able to develop properly.
Concrete floor paints are available in both oil based alkyd and water based latex forms both formulated to resist stains and dry to a satin non slip finish.
This is a good way to treat high traffic areas.
This describes the walls in a typical interior living room bedroom dining room or hallway.
About 6 months ago i got the great idea to paint my garage floors with 1 part epoxy paint.
For previously painted concrete or stone wire brush the floor to help the paint stick.
Because not only can i share with you how i did it but i can also share with you how it s held up over the 6 months that i ve been walking on it nearly daily in my garage.
They re a perfect combination if i do say so myself.
These initial layers also serve as the basis for a custom design.
In addition to this and contrary to popular belief don t be fooled into thinking you can get away with only one coat of a darker colored paint.
Pick up a can of tintable primer e g zinsser deep tint available at lowes and ask the paint store or paint department associate to bring it up to 50 percent of the new shade.
Alternatively you can pour some of the paint into a container and dilute with 10 water.
You can purchase home floor coating at your local home depot coming to amazon in may 2020 and the paint counter can tint it for you.
For our first base coat we chose one of our favorite hues of the 32 color options icy gray.
The second base coat was white which didn t need to be tinted.
If your customer wants a more durable finish you can scrape away the second coat and apply a coat or two of clear sealer to give the floor a higher shine and protection.
But that s a good thing.
Clean dry and fairly low porous surfaces in good condition may not need any priming.