Masonite covers a wooden subfloor or concrete slab s imperfections giving the laminate or hardwood flooring a smooth and flat surface to bond against.
Can you lay floor tiles over masonite.
The rest of the counter should consist mostly of whole tiles.
You can lay new tiles over existing ones provided the existing ones are in good condition with no cracked or loose tiles.
Lay the rest of the tiles.
Use the comb edge of the trowel to create grooves in the mortar that run in the same direction image 7.
The masonite is not structurally sound and it would be susceptible to damage from heat.
Clean the floor to remove any grease or dirt.
Answer it may be possible to adhere ceramic tile to masonite but it is not recommended.
However if you can t remove the old surface or otherwise decide to install over it lay a backer board with thin set over the old surface to serve as your new subfloor material.
Before installing the masonite in a building the masonite must sit unwrapped on a flat surface until it adapts to the building s environmental conditions which usually takes about 24 hours.
You should first install a cement tile backer board which is more resistant to heat and moisture.
Remove any moldy or loose grout with a rotary tool or carbide scraper.
Is it okay to lay thinset and tile directly over the self leveling compound.
You should rough up the surface of the existing tile with sandpaper to aid adhesion and it s a good idea to spread two coats of thinset.
To lay tile over tile.
Installing over existing vinyl.
Grind them down using a right angle grinder with a masonry wheel.
Tile can be laid over existing tile as long as the floor is in good condition with no loose or broken tile.
I m hoping i don t even need the ditra.
Sand all the tiles with a belt or orbital sander 80 grit to scratch any surface glazes.
When you have a straight area to cover you can spread out the thin set over the entire area at once.
Normally i would use ditra to prevent cracked grout my house is wood frame from 1881 but the tiles seem like they re too small for ditra s indented square pattern.
Has anyone had this issue before with tiles too small for ditra.